Easy-Laser® Extreme™ D550

The new Easy-Laser® Extreme™ is an intrinsically safe ATEX-approved shaft alignment system for use in explosive environments. This is one of the most extreme systems on the market, rugged in design and made of stainless steel for use in extreme and harsh environments.

Easy-Laser® ExtremeTM is developed under the same conditions and philosophy as all Easy-Laser® products which stands for: Simplicity, Reliability, Flexibility and Ease of use.

The Easy-Laser® ExtremeTM is shockproof, waterproof, dustproof and classified according to IP67.

It is designed for the most demanding type of applications and the harshest of environments. It is built to last, so confident are Easy Laser that they have given it a four (4) year warranty. Which is the best you will find in the market today.

EasyTurn^TM - For the alignment of horizontal machines. Allows complete measurement with only 40 degree rotation of the shafts.

Horizontal - 9-12-3 - For the alignment of horizontal machines by the 9-12-3 method.

Softfoot - With this program you can check so that the machine is resting on all its feet. Shows which foot should be corrected (if necessary).

Thermal growth compensation - Compensates for difference in thermal growth between machines. (Sub function)

Tolerance Check - Checks the Offset and Angular values in relation to selected tolerance. Shows graphically. (Sub function)

Measurement Value Filter - Advanced electronic filter for accurate results even in poor measuring conditions such as air turbulence and high vibration. (Sub function)

Cardan - Shows angular errors and adjustment value on the cardan-shaftcoupled/ centre-offset machines. (Requires accessory fixtures.)

Vertical - For measurement of vertical and flange-mounted machines.

Machine train - For the alignment of two to ten machines in a row (nine couplings). The entire alignment can be followed live on the screen.

Reflock - Any pair of feet can be locked/set as a reference. (Sub-function in the machine train program.)

Offset and Angle - Shows centre offset and angular error between two shafts, for example. Also suitable for dynamic measurements.

Value - Shows live readings from S- and M-Unit. Can be used for shaft alignment, straightness measurement and dynamic measurement.

Straightness - For measuring machine foundations, shaft, etc.

There are many programs and sub-functions to guide the user through the alignment process. With the emphasis on EASY.

D550 System Case

• 1 Display unit D336
• 2 Cables with Push/Pull connectors, L=2m
• 2 Extra cables with Push/Pull connectors, L=2m, 5m
• 2 Measuring units (S: D335, M: D334)
• 2 Shaft brackets with chains
• 2 Extension chains
• 8 Rods
• 1 Manual
• 1 Measuring tape
• 2 Sets of batteries for the display unit
• 1 EasyLink^TM Windows¨ program plus PC cable and USB adapter
• 1 Carrying case with shock-absorbing lining. (Drop tested.)

Click on the PDF or contact us for more information.

PDF