|
The D670 Roll alignment system
|
The Easy-Laser D670
Parallelism system has evolved from many years of field experience
in solving measurement and alignment problems in paper and steel
mills, printing and plastic film industries etc.
The versatile design solves
the measurement problems quickly for any kind of application.
Objects up to 80 m [264 feet] (40 m in each direction from the
transmitter) can be measured in a single setup. The detector reads
2-axis measurement values (horizontal and vertical), with a
resolution of 0.0 01 mm [0.05 mils]. After the measurements are
taken any roll or base line can be selected as reference. The
results are then displayed digitally and graphically on the display
unit.
|
|
Not just for rolls, any
machinery parts that need to be parallel can be measured. Rails,
heads, ways etc. Up to 150 rolls or other objects can be measured.
Any chosen object or the baseline can be used as a
reference.
Typical
applications:
Parallelism, straightness, flatness
and level/plumb of papermaking machines, printing presses, rolling
mills, etc.
|
|
1 Display unit D172
1 Leatherette case (not
shown)
2 Cables with push-pull
connectors (2m, 5m)
1 Detector D5
1 Magnet base D45 with
turnable head
2 Sets of extension
rods
1 Swiveling laser
D22
1 Sliding table
2 Large target Base
line
1 Sliding bracket with
turnable head
1 Angular prism D46
1 EasyLink™: Windows® program
+ cable
1 Measuring tape
1 Manual
2 Carrying cases
2 Tripods(not
shown)
|
D670
Roll Align System
|
|
D600 Machine
Shop ~ D630
Extruder ~ D670
Roll (Parallelism) ~ D650/D660 Linebore/Turbine
|
  
 E-mail: info@withinspec.com
Toll Free:
1-800-598-1117,Local: (905) 509-6522 Fax (905) 509-6478
599 Nomad Road,
Pickering, Ontario L1W 3T5 Canada
Copyright
1999-2003
|
