The D660

For straightness measurement of bearing journals and diaphragms in turbines, with a measurement resolution down to 0.001 mm [0.05 mils]. With the standard kit, journals with diameters from 150 mm to 1700 mm [5.9-66.9"] can be measured (accessories for other diameters manufactured at request). Measurement distance up to 40 m [132 feet]. The system automatically calculates the position of the bores in both horizontal and vertical direction compared to each other. Up to 600 measurement locations can be stored.

Laser Transmitter

The laser transmitter is the same as for the Linebore system, and its rigid design assures the highest measurement accuracy. It has three sets of adjustable arms with magnets to fit different diameters. Fine adjustment of the laser beam in horizontal and vertical direction is made very easy with the offset hub.

Detector fixture

The rigid detector fixture comes with extension beams for large diameters and extension rods for the measurement probe. The detector is rotated and moved with the detector slide. The adjustable magnet attachment and the over all versatile design makes the fixture very easy to handle during the measurement, when journals of different diameters have to be measured.

Measuring the diaphragms and bearing journals of a turbine.

The results of all your measurements can be viewed on the display unit in digital or graphical format, or can be downloaded to a PC with the Easy link program. This program allows you to export your files into Excel or Word programs etc. for making detailed reports.

D660 Turbine System

• 1 Display unit D172
• 1 Leatherette case (not shown)
• 2 Cables with push-pull connectors (2m, 5m)
• 1 Laser transmitter D75 with offset hub
• 1 Detector Linebore
• 1 Printer with cable and charger (not shown)
• 1 Set of attachment items
• 1 EasyLink: Windows program + cable
• 1 Measuring tape
• 1 Manual
• 1 Carrying case
• Accessory: Arms for other diameters.

• 1 Display unit D172
• 1 Leatherette case (not shown)
• 2 Cables with push-pull connectors (2m, 5m)
• 1 Laser transmitter D75 with offset hub
• 1 Detector unit D5
• 1 Detector fixture with magnet bases and extension beams
• 1 Set of probe extensions
• 1 Centering target
• 1 Printer with cable and charger (not shown)
• 1 EasyLink: Windows program + cable
• 1 Measuring tape
• 1 Manual
• 1 Carrying case
• Accessory: Arms for other diameters.

D660 Turbine System